Discontinued Kedr CUT-63G, etc.

MultiMIG-5000P trolley - for transporting the source, the liquid cooling unit and the welding wire feeding mechanism assembly. It is convenient for use on production sites, in workshop conditions for moving a semi-automatic welding machine in the welding area.

The liquid cooling unit for MultiMIG-5000P is designed to work only with a welding source Kedr MultiMIG-5000P.

The CUT-40N air plasma cutting machine has been discontinued.

The CUT-60G, 380V air plasma cutting machine is designed for plasma cutting of any conductive materials: mild steels, stainless steels, galvanized steels, aluminum, copper and various alloys.

The CUT-160I air plasma cutting device, 380V is the most powerful inverter source of manual plasma cutting from the range, designed for cutting any conductive materials: mild steels, stainless steels, galvanized steels, aluminum, copper and various alloys. With a cutting current of 160A, the device is able to handle structural steel up to 50mm thick, and with thicknesses up to 40mm, it feels confident even during prolonged work. For ease of movement, 4 wheels and lifting brackets (eyelets) are provided. A compressor must also be connected to the unit to supply compressed air.

The CUT-40B air plasma cutting machine is designed for air plasma cutting of sheet and long-range metal products, the thickness of which does not exceed 12 mm. Powered by a classic 220 volt household network, it allows you to use this installation almost everywhere. The unit is equipped with a built-in compressor and has an automatic air pressure control system depending on the selected cutting current. If necessary, it is possible to disconnect the built-in compressor and connect the device to either an external compressor or a centralized compressed air supply system. It can be used for cutting structural and alloy steels, as well as non-ferrous metals and alloys.

The CUT-100IJ air plasma cutting machine, 380V With a cutting current of 100A, the device is able to handle structural steel up to 40 mm thick, and with thicknesses up to 30 mm, it feels confident even during prolonged work without losing cutting quality.

The CUT-63G, 380V air plasma cutting machine is designed for plasma cutting of any conductive materials: carbon steels, stainless steels, galvanized steels, aluminum, copper and various alloys. With a cutting current of 60A, the device is able to handle carbon steel up to 20 mm thick.

Models: CUT-60G, CUT-160I, CUT-40B, CUT-100IJ, CUT-63G, TIG-180DSP, TIG-500P, TIG-315BP AC/DC, BJO for TIG-500P AC/DC, BJO-9L (220V, 8.5 L/min, 3 kg/cm2, 15 kg), MMA-160, MMA-180, MMA-180GDM, MMA-200, MMA-200GDM, MMA-220, ARC-180, ARC-250, ARC-250GS, MIG-160GDM, MIG-200GW, MIG-250GN, MIG-250GS, MIG-250GW, MIG-500GF, MULTIMIG-5000, MIG-300GD.